To wash the Max Racing Exhaust’s washable type air filter, you will just need some simple tools such as screwdrivers for certain cars and an air filter cleaner.

Procedure to perform the wash:

1. Dissemble the air filter.
2. Wash it with clean water, make sure it’s wet
3. Apply Max Racing special formulated air filter cleaner evenly at 1 spray every 3 cm with a distance of 5~10 cm between the air filter and air filter cleaner.
4. Soak it for 5 minutes.
5. Use clean water to wash away the air filter cleaner detergent.
6. Let it dry under the sun or air blower.
   (avoid high-pressure air guns as they may damage the cotton density.)
7. Re-install the air filter.

Max Racing Exhaust’s air filter cleaner is a specially formulated detergent and is a powerful cleanser that can break up dirt, oils, and grease from automotive air filters. It is stronger than any general soap or shampoo and dissolves more completely in water.

Max Racing Exhaust air filters are designed to provide the best amount of cold airflow along with filtration abilities to ensure the best care for the engine life.

However, due to budget constraints requested by some consumers, Max Racing introduced two different types of air filters which the normal air filter and the washable type air filter.

🔴🔵 Normal air filter
Only need to replace a new filter every 1 year or 20,000km, whichever comes first, to maintain the best engine care and performance.

🔵 Premium Washable air filter & Replacement Air Filter
Can be cleaned up any time with just clean water and/or detergent. Simply rinse the dust away as you would with air conditioner filters and you’re good!

(Do let it dry before reinstalling back onto the intake system*)

If maintained nicely, the premium filter lifespan can last up to 50,000km for heavy-duty, and 100,000km for just daily use.

Max Racing Exhaust performance type drop-in air filter enhances the air flow efficiency of the stock intake system. Max Racing air filter improves the ability of the original car manufacturers designed hardware, and allows car owners to enjoy some gain and improvement on horsepower & torque.

Comparison to the Max Racing Exhaust intake system, a powerful intake system required in depth research & development and multiple tests to the whole car to get a better results. We developed each of our products, including intake system on the specific car & different engines to gain more horsepower & torque than the stock intake hardware. Making it better fuel efficiency & more powerful to drive.

Max Racing Exhaust air filters are specially designed to replace the traditional paper air filters and any aftermarket replacement air filters in your car’s intake.

Max Racing Exhaust air filters are designed and made from premium dry-type synthetic fibre cotton with engineered stitches, and densities and clamped with aluminium wire mesh for better airflow, allowing greater fuel saving and ensuring higher engine torque for faster and smoother acceleration. Max Racing Exhaust’s air filter also provides better filtration to keep the air clean for your engine!

Unlike other oil-type air filters, Max Racing Exhaust air filters do not need to apply any filter oils that may damage the air flow sensors, and most importantly, no additional cost to be spent on the special filter oil and spoilt sensors replacement.

Max Racing Exhaust air filters can be easily installed via a simple plug & play method and it will help you save maintenance costs in the long run as it is washable and reusable for up to 100,000km depending on the driving condition!

Recommended washing the air filter at every 5,000 – 10,000km mileage, depending on your driving condition. The cleaning kit can be acquired here

Unfortunately, no you can’t. Every exhaust catback system is specially engineered & developed with the optimum exhaust flows, angles and specs. Starting from the pipes, designated resonator, muffler and construction are all precisely fine-tuned by Max Racing professional motorsport engineers to make sure the car can get perfect performance & sounds from low rpm to high rpm.

Exhaust packages are paired with the best exhaust resonator & muffler for specific cars. They require welding service to install at a local exhaust workshop and do not include pipes or any other services. You can get the exhaust sound mentioned in each exhaust upgrade package but they are different to the full catback system since parts in the exhaust catback are not sold individually.

Choosing the proper diameter of the tubing for your exhaust system is as important as selecting the right muffler. Your tubing diameter choice will affect the sound level and performance characteristics of the muffler, but keep in mind that bigger is not always better. Using tubing that is too large can actually hinder exhaust scavenging by slowing the velocity of exhaust pulses in the tubing resulting in a loss of torque. And torque is what moves the car.

There are many variables that need to be taken into consideration when choosing the correct tubing size for your application, such as engine technology (flat head engines vs 60’s engines vs present-day engines) cubic inch, catalytic converters, head flow, vehicle weight, how the vehicle is driven and numerous others. Light to moderately modified street applications will generally use 1-5/8″ to 2-1/2″ depending on the engine displacement, power output and the product type paired in the whole system.

In most of the Max Racing Exhaust product packages, our experts have listed a series of tested product lists along with the recommended pipe sizes. Where the specific package combination will get the sound as advertised, and with the best power gain

To learn more about choosing the right exhaust pipe, visit our page for more: https://maxracing.co/rules-of-thumb-pipe-diameter/

You may construct your preferred product combination when on the product package’ pages.

But keep in mind, any single difference of product or spec will directly cause power and sound to be changed differently, most of the time are lower than our expert recommended combination.

Only the exact item is allowed in the upgrade system to get the advertised results. Cause, every millimetres count.

General straight-through mufflers are constructed using a perforated flow tube wrapped with either steel wool or fiber glasses to simply absorb sound. This type of technology generally does the least infibrecing sound, especially in the cab of the vehicle and hardly reduces the noise of the exhaust drone. The packing materials can burn out fairly quickly resulting in a shortened life span and increasing sound levels both inside and outside the vehicle.

Unlike the straight-through mufflers, Max Racing Exhausts products are designed to high-quality glass fiber and a controlled amount of stainless steel wool to absorb sound wave to cancel the sound wave frequency. Plus, some Max Racing products even use extremely high-temperature durable material that could last for years. Therefore, enabling it to maintain its sound control ability over the shelf-life of the product.

Max Racing Exhaust products are fully MIG welded for internal baffles parts, and fully TIG welded for external parts. Our products are built with SUS 304l, SUS 409L, SUS 201L, Aluminium 6061, Titanium Grade 5 and Aluminized Steel for durability, sound wave cancelling, vibration & damping force absorption and multiple engineering constraints.

Enjoy Max Racing Exhaust upgrade via 0-interest bank instalment payment! Your order will be sent out once the first payment is confirmed.

Applicable for Malaysian-only through the selected payment method.

1. Atome
   Credit limit using Debit Card: RM1500
   Credit limit using Credit Card (all banks): RM5000
   Maximum instalment months: 3 months
2. Shopback
   Limited spend of RM1600
   (Personal ID verification in ShopBack application required for higher credit limit)
3. Grab PayLater (subjected to GrabPay whitelisted account and credit limit only)

Upon application, please get ready these documents:

Direct verification in verified mobile applications or

1. Bank card (any Debit / Credit)
2. National ID (ie: Identity Card)
3. An active phone number that is able to receive an SMS verification code)

The instalment payment amount & schedule will be shown in a scheduled timetable.

Key in payment card detail for the payment then process with the instalment application.

Our team will send out your ordered parcel once the first payment is successful.

If you receive an error message related to debit/ credit card authorization failure, double-check that the billing address and information on the debit/ credit card match your account billing address, try re-entering your card number, CVC or security code, and be sure that the card is current (not expired) and valid. After validating the information you’ve entered and an error message is received on a second attempt, please call your bank/ financial institution for further assistance.

For international customers, most of the time might be because the card’s daily international transaction limits are either not activated at the amount planning to spend or your purchase had exceeded your international transaction limits set. You can

1. Activate/ increase the international transaction limit of your debit/ credit card on your bank apps/ online bank portal (the Card does not present physically).
2. Call your local bank or financial institution to activate or increase the international transaction limit on your credit card.

The answer is YES.

Max Racing Exhaust collaborate with FedEx Express & DHL Express for international parcel delivery, and coverage of 220 countries and territories around the globe. Door-to-door shipping costs will be calculated automatically based on your delivery address provided. Custom declaration services included.

International Delivery courier service usually takes 1 to 7 working days (with real-time tracking updates) to arrive in the country and may take some time to process the custom check process (This depends on the local custom procedure).

• The local custom service partners will contact you for the custom import duties & warehouse handling fees if the local customs officers requested it.

All orders are usually processed and delivered within 3 working days from Max Racing headquarters located in Penang Malaysia after payment confirmation between Monday and Friday (Holidays excluded).

For special custom-made products or items that are not ready in stock, production and delivery time (in accordance with different shipping methods) will vary as shown in the quotations:

General item: 7-14 days

Special-made item: 20-30 days

Handcraft takes time, we appreciate your patience.

Domestic Delivery

Peninsular Malaysia

DHL eCommerce Courier service, usually arrive within 1 to 3 working days.

East Malaysia

DHL Worldwide & FedEx Express Courier service usually arrives within 1 to 7 working days, rural areas might take a longer time.

*In special conditions (rural areas, etc), DHL Courier service, might change to other courier services depending on the local best shipping provider.

International Delivery

DHL Express and FedEx Express courier service, 1 to 7 working days with real-time tracking.

shipping cost from Malaysia to the USA, the actual real-time international shipping cost will be calculated automatically at the checkout page based on your delivery address.

As for currencies, the amount with actual bank conversion will be shown during card 3D Secure validation.
(If using credit/debit cards)

To proceed using PayPal payment, the conversion rates will be based on PayPal foreign rates (higher rates than bank rates).

Order tracking ID and notes will be updated in your purchased email address provided during order placement. Parcel movement will be based on the selected courier companies tracking system updates.

Yes, you can.

Order tracking ID and notes will be updated in your purchased email address provided during order placement. Parcel movement will be based on the selected courier companies tracking system updates. Make sure to inform the workshop about the incoming parcel and remember to make a booking for the installation.

Max Racing Exhaust-branded hardware product contained in the original packaging (“Max Racing Exhaust Product”) against manufacturer defects in materials workmanship when used normally for a period of ONE (1) YEAR from the date of original registration by the end-user purchaser (“Warranty Period”).

Please note: All claims made under the Max Racing Exhaust One-Year Limited Manufacturer Warranty will be governed by the terms set out in this warranty document.

This warranty does not apply to any non-authentic Max Racing Exhaust branded products, even if packaged or sold with Max Racing Exhaust name are counterfeit products may not provide their own warranties to you.

This warranty does not apply:

• to consumable parts such as heat-resistant fiber, air filters, cleaning liquids, etc.
• to cosmetic damage, including but not limited to scratches, and dents.
• to damage caused by third-party components or products.
• to damage caused by accident, abuse, misuse, fire, liquid contact, earthquake, flood or other external cause.
• to damage caused by improperly installed the product.
• to the product which had been modified without the permission of Max Racing Exhaust.
• If Max Racing Exhaust logo or serial number has been removed or defaced.
• If the product is not registered, or expired, or the user cannot prove any of the registered details.

Any claim of the product only covers the specific “product”, which shall not include any shipment, installation, handling insurance, duty or taxes fees.

Max Racing Exhaust logo is welded and laser printed with the serial numbers on almost every product. If you are unsure of the model/code / serial numbers, you may snap the product photos and verify them with our customer support team via Facebook messenger live chat.

Buyer beware, Max Racing Exhaust knock-offs may look similar and claim by certain sellers, but they may not perform or sound the same as the authentic one, and often have higher defect rates or even damage to the engines.

Choosing the proper diameter of the tubing for your exhaust system is as important as selecting the right muffler. Your tubing diameter choice will affect the sound level and performance characteristics of the muffler, but keep in mind that bigger is not always better. Using tubing that is too large can actually hinder exhaust scavenging by slowing the velocity of exhaust pulses in the tubing resulting in a loss of torque. And torque is what moves the car.

There are many variables that need to be taken into consideration when choosing the correct tubing size for your application, such as engine technology (flat head engines vs 60’s engines vs present-day engines) cubic inch, catalytic converters, head flow, vehicle weight, how the vehicle is driven and numerous others. Light to moderately modified street applications will generally use 1-5/8″ to 2-1/2″ depending on the engine displacement, power output and the product type paired in the whole system.

In most of the Max Racing Exhaust product packages, our experts have listed a series of tested product lists along with the recommended pipe sizes. Where the specific package combination will get the sound as advertised, and with the best power gain

To learn more about choosing the right exhaust pipe, visit our page for more: https://maxracing.co/rules-of-thumb-pipe-diameter/

You may construct your preferred product combination when on the product package’ pages.

But keep in mind, any single difference of product or spec will directly cause power and sound to be changed differently, most of the time are lower than our expert recommended combination.

Only the exact item is allowed in the upgrade system to get the advertised results. Cause, every millimetres count.

The sound of your exhaust is much like music; we all have different preferences so it’s important that the system be “tuned” to what you like.

In most exhaust upgrade packages, we will have one or more related video sound clips attached to the product page if there is any previous car owner who agreed to share his ride’s video.

Can’t find the sound you’re looking for?

With the Max Racing Exhaust family of products, we can help accomplish this by answering the questions below. This approach will allow you to choose the best product to suit your needs and expectations

1. What is the vehicle’s year, make, and model?
2. If there is any modification made before this, how much horsepower does she produce?
3. What is the vehicle used for?
   (i.e.: daily driver, race, towing etc.)
4. Preferred sound levels?
   (Silent/ Low deep bass/ Moderate sport sound/ Loud/ Very loud/ Valve controllable or video link if applicable.)

May send them to our Facebook live chat for a one-to-one personal consultation.

Max Racing Exhaust is a brand that developed, produced and supplied intake & exhaust parts from Malaysia. Our product is designed and fabricated from the raw material to product parts, assembled and lap-joint welded by our professional welder. Every part is carefully tested with our brand philosophy:

Premium, Quality, Refine.

We ensure all our product is of Premium Quality that could be competitive enough in the international market with such affordable product price. All our parts (internal & external) are fully lap joint welded to ensure long-lasting rugged reliability even in the most extreme conditions.

No. Max Racing Exhaust does not provide installation services. Prices of every product listed are only for standard products cost.

• The shipping fee will be calculated automatically during payment based on your delivery address.
• The installation labour surcharge may be subject to your local exhaust workshop service charge and additional fee.
  (In Malaysia, installation is capped at the range of RM80~2xx per product, some may be higher depending on the difficulties & tools required or utilised)
• International import duty may be incurred in some countries if you’re an international buyer.

1. By clicking the “add to cart” button, a small window of the cart page will pop up on the right side of the screen.
2. Check the item in the cart, and click on the “Checkout” button.
3. Fill in your personal billing information and delivery information, the actual shipping cost will be calculated automatically.
4. Select your preferred payment method and check the consent box about the buyer terms agreement, and click the “Place order” button.
5. You will be redirected to the secured payment pages depending on which payment method selected.
6. Proceed with the payment.
7. The order progress and parcel shipment tracking ID will be sent to your email.
8. Wait for the parcel’s arrival, and schedule an installation date with the local exhaust workshop.
9. Installed & all set!

The product costs listed online are not included with any duty taxes, service and labour charges.

The shipping fee will be calculated automatically based on your delivery address provided during order confirmation at the checkout page.

International users, it is encouraged to purchase our products directly from our official website to ensure product authenticity, the right product model and specification. Product warranty will be registered directly from the date of purchase.

• The international shipping cost will be calculated automatically based on the delivery address provided during payment.

For Malaysian users, you can order and install max Racing Exhaust products at any of our authorized dealers’ workshops around entire Malaysia. Just need to present the item cart list (with the product SKU listed below the name) to request the exact item.

• Please noted that any single different of alphabets or numbers representing different product specs and models. This will directly affect the performance & exhaust sound compared to the advertised results.

Almost all of our products can be installed at any exhaust workshop with simple welding work, and just plug & play for intake  system, air filters and exhaust catback system.

If you’re in Peninsular Malaysia, you may locate our authorized workshops for the installation services here (Additional charges apply for labour, service, and any other additional parts).

• Max Racing Air filters & air intake systems can be installed via “plug & play” using general tools.
• The Max Racing exhaust header, turbo downpipe and exhaust catback system can be plug-and-play with essential tools & safety equipment.
• The exhaust resonator, muffler and tailpipe will require welding services.

Max Racing Exhaust currently served more than ten thousand different models and specifications of exhaust products. Expecting the workshop to have everything might be challenging for them to ready. But, if you wish to request them to help order something that you actually want, you may

1. Add the selected item list to the cart.
2. Show the dealer the SKU listed below the product name.
3. Order and wait for parcel arrival (depending on stock availability).
4. Install the premium upgrades.

*Please noted that any single alphabet or number difference may mean different models & specs.